Cb0178-12 load data.

You just "discovered" the same intended usage data that Hodgdon put out when they introduced Perfect Pattern. It's a 1 ounce light target load powder at the heaviest use. Or 7/8 ounce. The (newly relabeled) powder they introduced for 12 gauge 1 1/8 ounce handicap type target loads is of course High Gun (aka, TiteGroup).I've used the Claybuster CB1118-12 (WAA12 type) for some of my 1-1/8 oz loads, they seem to work OK at just a little over 1200 FPS but hadn't tried the CB0178's. I haven't had too much trouble with the crimps, but I'm only on my 2nd or 3rd time around on most of these hulls.The proper 7/8 Claybuster wad is the CB0178-12 (grey wad) I load: 7/8 oz of #9 shot Remington STS or Gun Club Winchester 209 primer Claybuster CB0178-12 Wad 17.1 Grains of Clays Love this load, and shoot 1000's of them.Federal Gold Medal Plastic. Win 209. 700x (16 gr) Claybuster CB0178-12 wad (WAA12L) 7/8 oz lead #7.5. My goal is to get a load that is as comfortable as possible for my daughter shooting for her high school trap team. She's fairly petite and the store bought shells seem to pound on her. Right now she's shooting 1145 fps 1 oz loads.

In my 3/4 oz. 12 gauge loads I use the AA-HS or any Remington hull; 16.9 grains of Promo from a MEC No. 29 bushing; Claybuster's CB0178-12 clone of the WAA12L wad; either Fiocchi or NobelSport primers. Great load, which will break targets easily out to about 30 yards.I have been reloading the older style AA hulls for quite some time. I recently got some of the new(er) style HS hulls to try. I substituted them in my recipe for the older style (19.5gr Green Dot, Winchester 209 Primer, CB1118-12 wad) and at first, experienced a large hole in the center.Product Overview. Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads. Wads are essential for shotshell reloading.

The Ultimate Reloading Manual. Click here to see the loads added in the last month! With our load data you can search by caliber, bullet weight, powder, powder manufacturer or a combination of all four. Metallic Search. Shotgun Search.

His reloads show a very shallow dishing, not enough to hurt anything. He shoots them in O/U and Pump Shotguns. No feeding problems and superb performance. Properly adjusted presses and properly assembled components will accomplish a 7/8 oz. load in a Remington TGT wad, or a DRRT12 wad, or the CB8100-12 wad without problems. Quantity. Detailed Description. Claybuster CB1100-12 WAA12SL wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading. Select the hull, wad and powder combination that you are using in the data source and select the top charge for one oz. Then load 7/8 of shot instead and the fit and performance should be fine. ... You CAN use the CB1100-12 wads to load 7/8oz. in Rem hulls, but even with no wad pressure you will get sloppy dished crimps when using fast …Claybuster CB0178-12 WAA12L wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-two different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading.CB0178-12 (WAA12L). For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or Winchester. Specifications and Features: REPLACES WINCHESTER WAA12L. Check your reloading manual or go to a powder manufactures website for load data. WARNING: This product contains chemicals known to the State of ...

CLAYBUSTER WAD 12ga 1oz (TGT-12) 5000/CS . 6. $141.99. In Stock Item #: CB8100 $0.03 per piece. CLAYBUSTER WAD 12ga 1oz (TGT-12) 500/BAG . 10. $15.09. In Stock ... What started as a small dream has become a multi-million dollar international business selling ammunition, reloading supplies and accessories. Read Our Story. Want a Copy …

141114-6123X9 12 Cheddite Ched209 Win AA Sup. Handicap 26 L078 X-Stream Spreader 7/8 382 Lead #9 10000 1485 141114-61239 12 Cheddite Ched209 Win AA Sup. Handicap 26 L078 OS12 7/8 382 Lead #9 10000 1485 141114-6125-75 12 Cheddite Ched209 Win AA Sup. Handicap 28 L078 7/8 382 Lead #7.5 10700 1600 141114-6125X8 12 Cheddite Ched209 Win AA Sup.

The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading. For use in 7/8 to 1 oz. Trap, skeet, sporting clay or hunting loads.3/4 oz. 12 ga. Loads with e3. I searched the reloading section and found Case's light 3/4 oz. load. There was a comment in the string from Case that said you could use any 12 ga. powder, and using a published 7/8 oz. recipe for that powder, drop a grain or two. I currently use 16.2 gr. of e3 with a 7/8 oz. load, so I would have to drop down to ...Mar 9, 2008 · Exactly the same. The overall height is about 1/16" shorter than the CB0178-12, but that doesn't matter. The XXL Pink's petals stand straight, whereas those of the CB0178-12 are flared out a bit, still no big deal. Flip a coin or go for the cheapest - either is an excellent wad, especially for 3/4 and 11/16 oz. payloads. Looking for some help with load data. I'm using 45 colts in my rifle and 45 cowboy specials in my pistols. Using 180gr cast boolits. The easy thing to do is fill the case with powder. But I think it's going to cause unnecessary recoil/smoke/noise. My typical 12ga loads are 12-12.5grs Promo, CB0178-12 grey clay buster wad, and 7/8oz shot in ...CB0178-12 wads By Gregory M. on Jan 23, 2023 . This wad works perfectly in Winchester and Remington hulls pushing 7/8 shot. ... it in tapered hulls of all types, with shot from #7-1/2 to 9, @ 1150 - 1300+ and it seems to shoot great. I generally load light, 9's for skeet and 8's for trap, but also some faster 'killer bee' loads for fast ...Shotshell Reloading. help loading 7/8 oz w/ new wad? Jump to Latest Follow 914 views ...

Product Overview. Buy Claybuster Shotshell Wads 12 Gauge CB0178-12 (Replaces WAA12L) 7/8 oz Online. Intended as an economical wad replacement for name brand …The problem is finding reliable load data for Trap Shooting in an over/under or for SASS Cowboy Action in a side-by-side, if that's even a thing. Number 7-1/2 or 8 shot, 7/8 or 1 ounce, 1200 fps. ... Standard Claybuster CB0178-12 gray wad (WAA12L equiv, 7/8 oz shot), but trimmed the petals 1/8" short to fit 5. 7/8oz #7-1/2 shot 6. Overshot card ...You really have 3 choices for great fit with 7/8 oz. loads. CB0178-12 Claybuster Clear Duster, (I like this one best) DR XXL-7/8 (Pink) Down Range wad ... So much so, that with the advent of the new Claybuster CB0175-12, I don't even buy 7/8th's wads any more (the grey CB0178-12's).15172 posts · Joined 2007. #9 · May 13, 2014. I know that chuckie. I shoot that load as well, but with a DR wad. It's a great load. But, nobody should rely on load data given on a discussion web as gospel. They should go by the loading manual or call the powder manufacturer if an unlisted substitution is considered.Titegroup is also used for 1 1/8 loads in 12 gauge. Titegroup has numerous shotgun loads in the Hodgdon manual. It isn't just a pistol powder. Many good shotgun powders are also pistol powders. Being used in pistol shouldn't be an issue. Clays, e3, Unique, Red Dot, 700X and many others double as pistol/shotgun powders.With our load data you can search by caliber, bullet weight, powder, powder manufacturer or a combination of all four. Search over 311,644 loads! Metallic Search ... John Haviland / Wolfe Publishing 12/5/2019 . In this age of ever-increasing propellant specialization, it’s nice to have a powder that works in a broad range of rifle and handgun ...

Currently I use this wad( CB0178-12) for 3/4 oz loads with good results and just want to make a few boxes with 1 oz. Tim. Patience is a waste of time. ...The last few weeks have been rocky, with the collapse of Silicon Valley Bank, and the crypto-heavy Silvergate and Signature banks, dominating t... The last few weeks have been rock...

.38 Special - Published Manufacturer Loading Data Shellholders: Lee #1The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads. Technical Information: •Replaces the Winchester WAA12L •Optimal Load: 7/8 oz •Intended as an economical wad replacement for target and wing shooters •Wads are made with 100% prime resin for consistency These are the best wads to use for ...173 posts · Joined 2006. #4 · Sep 3, 2009. For the AA hull with a 24 gram//7/8 oz shot load, try the CB1100-12. This is the Winchester 12SL copy. I see better uniformity in the patterns and more consistent crimps with good old Red Dot than with the CB0178-12L. It's also easier to pick up and stuff in the wad guide increasing production speed. Detailed Description. Claybuster CB1078-12 WAA20 wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading. Win 209 primer. Claybuster CB5050-410HS wads. 296 or H110 powder (they are the same ST marks powder, so pick up which every branding name is cheaper) and this powder will give the hulls the longest reloading life. Ream the shot bushing to throw 226Gr of shot in your reloading. The stock 1/2oz bushing is going to throw about 214grs, true 1/2oz ...Detailed Description. Claybuster SW250-12 SLUG WAD (250/bag or 2500/case) NEW! The new Claybuster Slug Wad is a beefy design, which is made to handle the rigors of slugs. The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad ...Nor is there any load data on the hogdon site. Does anyone have any load data for this powder for 12 gauge. the bottle has a load data on the front shows this only. ... AAHS, ANY REMINGTON HULL - CB0178-12, Downrange XXL Pink, Gray AA12L; FEDERAL, IMPORT HULL - CB2100-12, Downrange XXL Orange, Fed. 12S0. Those wads satisfy dimensions required ...Larry from Cookeville, TN. I have been loading the CB0178-12 with 13/16 oz. (by volume) and find it to be an outstanding load. Show More Testimonials. To receive additional information: J-Ron, Inc. [email protected]. Customer Service: 800-922-6287. 635 Bob Posey Street. Henderson, KY 42420.

STS or Gun Club hull, STS209 primer, 15.8 grains Alliant ExtraLite, CB0178-12 wad and 7/8oz #8 1/2 shot. Alliant says 1200fps @ 7450fps. It is super clean, fits well, is cheap to reload and works with your standard press settings. Here are two more loads that work well, but require crimp adjustments to prevent dished crimps.

AFAIK, the Winchester 980 fps load can only be duplicated with WaaLite powder. The Hodgdon site still lists loads for WaaLite, but it is no longer manufactured. You can find data for subsonic loads, and they will recoil less than a standard 1200 fps load, but the 980 load was and is a one off load. I've attached Ballistics pdf on subsonic loads.

So the whole load data is the Remington 12 gauge STS or Gun Club hulls, Winchester 209 primers, 24 Grains of Hi-Skor 800x powder, ClayBuster CB0178-12 wads which are replacements for the WAA12L, 1/8" thick Nitro Card (x2) in the wad cup, then the 7/8oz Lee Key Drive slug on top of the nitro cards, finished off with a factory 8-point crimp.With our load data you can search by caliber, bullet weight, powder, powder manufacturer or a combination of all four. Search over 311,644 loads! Metallic Search; Shotgun Search; Metallic. Caliber: Powder Type: ... Norman E. Johnson / Wolfe Publishing Co. 12/15/2016 . MEC Shotshell Wads 12 Gauge 78T4 (Replaces WAA12L, CB0178-12, XXL Pink) 7/8 oz Bag of 500. Product #: 428693. Manufacturer #: MEC78T4. UPC #: 098489035910. Write the First Review Ask a Question. Our Price: Front load washers have become increasingly popular in recent years due to their efficiency and space-saving design. However, like any appliance, they can experience problems from ...For 7/8 ounce loads I'm pretty much dead set on Claybuster CB0178-12 or WAA12L clones (grey ones), as there are several published loads for those. ... 7/8's Ounce Shot Loads Winchester Hull Primer Powder Grains Velocity F.P.S. Pressure P.S.I WIN 209 Clays 17 1200 7000 WIN 209 Clays 18 1250 7500I shoot skeet, and I'm new to reloading. I've been loading Remington 12ga hulls with this recipe: 7/8oz magnum 8s win209 16 grains Promo CB0178-12 From what I've read, this is considered a very light powder charge given the other components I'm using. In theory, what's the advantage in using...The more appropriate wads for your 3/4 oz. loads are Claybuster's CB0178-12 clone of the ridiculously overpriced gray WAA12L or Down Range's XXL Pink. All three mentioned are dedicated 7/8 oz. wads and will work very well with 3/4 oz. loads, but the latter two have slightly narrower base diameters and are specifically for non-straight-walled hulls.I've been loading a 7/8 oz skeet load with 17.7 gr of Competition, CB4100-12b or CB0178-12 wads and Cheddite primers. I've been happy with the performance. Velocity around 1250 and 7,500 psi for the CB0178-12 wad. No published data for a 7/8 oz load with the Windjammer clone wad (4100-12b) but if anything the pressure would be lower.As we continue to rely more on digital mapping technology, it’s becoming increasingly important to optimize the size of our maps. Large map files can be cumbersome, slow to load, a...Nor is there any load data on the hogdon site. Does anyone have any load data for this powder for 12 gauge. the bottle has a load data on the front shows this only. ... AAHS, ANY REMINGTON HULL - CB0178-12, Downrange XXL Pink, Gray AA12L; FEDERAL, IMPORT HULL - CB2100-12, Downrange XXL Orange, Fed. 12S0. Those …

Wads- Claybuster Shotgun Reloading Wads WAA12L .12ga #CB0178-12 . Posted in Reloading. In stock at Kodiak Lake Hunting and Fishing as of last week. Email us below for current price, and availability. [email protected]. Town: ...Detailed Description. Claybuster CB1118-12 WAA12 wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading.1122 posts · Joined 2010. #14 · Nov 16, 2010. +1 on the green duster. It is slightly taller than a win L wad, so it works great in the HS hulls with 7/8 load. My 7/8 load is HS hull, 17 to 17.5 of clays or red dot, win 209 primer. For 7/8 is rem hulls I use the DRXXL pink instead as the rem hull is slightly longer.74 posts · Joined 2013. #1 · Oct 17, 2019. I'm doing a little research into loading 7/8 oz. loads in either Gun Club or WW AA CF or HS hulls. Wad will be the gray Claybusters CB0178-12. CCI 209 primers. I want to use up several pounds of WW 452AA powder. This is where it gets complicated. I have a pretty fair library of shotshell data, old WW ...Instagram:https://instagram. movies seekonk mahitman holla girlfriend cinnamon instagrammuevase a la chingada pinche viejoivy nails marietta ga 2859 posts · Joined 2013. #10 · Apr 26, 2018. shootingcajun said: I shoot a lot of 7/8 oz. 12 gauge loads for 16 yard trap and 1st shot on trap doubles. Using a Remington STS hull, Winchester 209 primer, 17.1 grains Clays (Mec 30 bushing throws a bit lighter charge but works great), and a WAA12L/CB0178-12 (Grey) wad. best bars staten islandhow to view cvs pay stubs The reason for my interest in the clear duster is that it looks to have a shorter shot cup than the CB0178 grey wad. Both Claybusters CB0178 & CB1100 have the same size shot cup, the CB0178 has longer legs. ... I have already loaded almost 2 flats with 1 oz loads in pink CB1100-12 Wads and they worked perfectly. I just got started with the ... dryer idler pulley diagram Detailed Description. Claybuster CB0118-12 WT Promo wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading.Larry from Cookeville, TN. I have been loading the CB0178-12 with 13/16 oz. (by volume) and find it to be an outstanding load. Show More Testimonials. To receive additional information: J-Ron, Inc. [email protected]. Customer Service: 800-922-6287. 635 Bob Posey Street. Henderson, KY 42420.CB0175-12 ( 3/4 oz. Wad) For use in 3/4 oz. skeet, sporting clays or hunting loads. Versatile for most hulls depending on powder volume. Optimum load is 3/4 oz. Featuring Lead-in Taper. CB0178-12 (WAA12L) For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or Winchester.